Home      Log In      Contacts      FAQs      INSTICC Portal
 

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the 14th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.
Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.
Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
2. ROBOTICS AND AUTOMATION
3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
4. INDUSTRIAL INFORMATICS


AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Learning Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-Based Systems Applications
  • Machine Learning in Control Applications
  • Neural Networks Based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Engineering Applications
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Industrial Networks and Automation
  • Intelligent Transportation Technologies and Systems
  • Mechatronics Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Network Robotics
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Surveillance, Fault Detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


  • Adaptive Signal Processing and Control
  • Biological Inspired Sensors
  • Defect and Change Detection and Identification
  • Computer and Microprocessor-Based Control
  • Engineering Applications
  • Environmental Monitoring and Control
  • Information-Based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-Event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-Frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS


  • Computer-Based Manufacturing Technologies
  • Energy Efficiency and Green Manufacturing
  • Production Tasks' Design, Planning and Management
  • Human Factors & Human-System Interface
  • Industrial Automation and Robotics
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Scheduling and Control
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Industrial Internet of Things
  • Systems Modelling and Simulation

KEYNOTE SPEAKERS

Andre RosendoShanghaiTech University, China
Vitor SantosUniversidade de Aveiro, Portugal
Wolfram BurgardUniversity of Freiburg, Germany
Carme TorrasInstitut de Robòtica i Informàtica Industrial (CSIC-UPC), Spain

PAPER SUBMISSION

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (https://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
All papers presented at the conference venue will be available at the SCITEPRESS Digital Library.
A short list of presented papers will be selected so that revised and extended versions of these papers will be published by Springer in a LNEE Series book.
The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar, Google Scholar and Microsoft Academic.

SECRETARIAT

ICINCO Secretariat
Address: Av. D. Manuel I, 27A, 2º esq.
             2910-595 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://www.icinco.org/

VENUE

Madrid, the capital of Spain, is a cosmopolitan city that combines the most modern infrastructures and the status as an economic, financial, administrative and service centre, with a large cultural and artistic heritage, a legacy of centuries of exciting history.

CONFERENCE CHAIR

Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France

PROGRAM CHAIR

Oleg GusikhinFord Motor Company, United States

PROGRAM COMMITTEE MEMBERS

Hussein Abdullah, University of Guelph, Canada
Andrew Adamatzky, University of the West of England, United Kingdom
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Qingsong Ai, Wuhan University of Technology, China
Adel Al-Jumaily, University of Technology Sydney, Australia
Erdinç Altug, Istanbul Technical University, Turkey
Stefan Andrei, Lamar University, United States
Mihail Antchev, Technical University - Sofia, Bulgaria
Rui Araujo, University of Coimbra, Portugal
Helder Araújo, University of Coimbra, Portugal
Rafael Aroca, Universidade Federal de São Carlos, Brazil
Vijanth Asirvadam, Universiti Teknologi PETRONAS, Malaysia
T. Asokan, Indian Institute of Technology Madras, India
M. Amine Atoui, UBS, France
Alfonso Baños, Universidad de Murcia, Spain
Guilherme Barreto, Universidade Federal do Ceará, Brazil
Dennis Barrios-Aranibar, Universidad Católica San Pablo, Peru
Ruth Bars, Budapest University of Technology and Economics, Hungary
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Carsten Behn, Schmalkalden University of Applied Sciences, Germany
Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
Lyes Benyoucef, Aix-Marseille University, France
Karsten Berns, University of Kaiserslautern, Germany
Reinaldo Bianchi, Centro Universitario da FEI, Brazil
Mauro Birattari, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Richard Braatz, Massachusetts Institute of Technology, United States
Glen Bright, University of KwaZulu-Natal, South Africa
Sebastien Briot, Laboratoire des Sciences du Numérique de Nantes, France
Kevin Burn, University of Sunderland, United Kingdom
John Burns,
Fernando Caballero, University of Seville, Spain
Kenneth Camilleri, University of Malta, Malta
Giuseppe Carbone, Università della Calabria, Italy
Joao Carvalho, Federal University of Uberlandia, Brazil
Alessandro Casavola, University of Calabria, Italy
Riccardo Cassinis, University of Brescia, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Kit Chan, Curtin University, Australia
Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
Albert Cheng, University of Houston, United States
Sung-Bae Cho, Yonsei University, Korea, Republic of
Ryszard Choras, UTP University of Sciences and Technology, Poland
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne, France
Daisuke Chugo, Kwansei Gakuin University, Japan
Carlos Coello, CINVESTAV-IPN, Mexico
Armando Colombo, Hochschule Emden/Leer, Germany
Armando Colombo, Institute for Industrial Informatics, Automation and Robotics (I2AR), University of Applied Sciences Emden/Leer, Germany
James Conrad, University of North Carolina at Charlotte, United States
José Cunha, University of Trás-os-montes and Alto Douro, Portugal
Prithviraj Dasgupta, University of Nebraska, United States
Angel Del Pobil, Universitat Jaume I, Spain
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino, Sapienza University of Rome, Italy
Alexandre Dolgui, IMT Atlantique, France
Daniel Dolz, Universitat Jaume I, Spain
Wenjie Dong, University of Texas Rio Grande Valley, United States
Xingye Dong, Beijing Jiaotong University, China
António Dourado, University of Coimbra, Portugal
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd, American University of Kuwait, Kuwait
Ali Eydgahi, Eastern Michigan University, United States
Simon G. Fabri, University of Malta, Malta
Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
Javier Fernandez de Canete, University of Malaga, Spain
Antonella Ferrara, Università degli Studi di Pavia, Italy
Luca Ferrarini, Politecnico di Milano, Italy
Antoine Ferreira, INSA Centre Val de Loire, France
Fanny Ficuciello, Università degli Studi di Napoli Federico II, Italy
Rolf Findeisen, Institute for Automation Engineering (IFAT), Otto-von-Guericke University Magdeburg, Germany
Paolo Fiorini, University of Verona, Italy
Fabrizio Flacco, CNRS - Centre National de la Recherche, France
Juan Flores, University of Michoacan, Mexico
Georg Frey, Chair of Automation and Energy Systems, Saarland University,, Germany
Antonio Frisoli, PERCRO Laboratory, Scuola Superiore Sant’Anna, Italy
Emanuele Frontoni, Marche Polytechnic University, Italy
Toyomi Fujita, Tohoku Institute of Technology, Japan
Mauro Gaggero, National Research Council of Italy, Italy
Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
Ryszard Gessing, Silesian University of Technology, Poland
Wojciech Giernacki, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
Paulo Gil, Universidade Nova de Lisboa, Portugal
Giuseppina Gini, Politecnico di Milano, Italy
Maria Gini, University of Minnesota, United States
Adriana Giret, Polytechnic University of Valencia, Spain
Nils Goerke, University of Bonn, Germany
Luis Gomes, Universidade Nova de Lisboa, Portugal
Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
Amr Goneid, The American University in Cairo, Egypt
Irene Gregory, NASA Langley Research Center, United States
Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak, Warsaw University of Technology, Poland
Kevin Guelton, University of Reims Champagne-Ardenne, France
Deepak Gupta, Wichita State University, United States
Thomas Gustafsson, Luleå University of Technology, Sweden
Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Maki Habib, The American University in Cairo, Egypt
Jörg Hähner, Universität Augsburg, Germany
Kensuke Harada, Osaka University, Japan
Jennifer Harding, Loughborough University, United Kingdom
John Harris, University of Florida, United States
Milton Heinen, Universidade Federal do Pampa, Brazil
Suranga Hettiarachchi, Indiana University Southeast, United States
Diana Hintea, Coventry University, United Kingdom
Yasuhisa Hirata, Tohoku University, Japan
Mathieu Hobon, CEATech Lorraine, France
Wladyslaw Homenda, Warsaw University of Technology, Poland
Morten Hovd, Department of Engineering Cybernetics, Norwegian University of Science and Technology, Norway
Jonathan How, Massachusetts Institute of Technology, United States
Gianluca Ippoliti, Università Politecnica delle Marche, Italy
Ivan Ivanov, Sofia University "St. Kl. Ohridski", Bulgaria
Dmitry Ivanov, Berlin School of Economics and Law, Germany
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Naeem Janjua, ECU, Australia
Gerrit Janssens, Hasselt University, Belgium
Thira Jearsiripongkul, Thammasat University, Thailand
Michael Jenkin, York University, Canada
Myong Jeong, Rutgers University, United States
Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Márcio José da Cunha, Federal University of Uberlândia, Brazil
Marc Jungers, CNRS - Université de Lorraine, France
Imed Kacem, Université de Lorraine, France
Michail Kalogiannakis, University of Crete, Greece
Dimitrios Karras, Sterea Hellas Institute of Technology, Greece
Tohru Kawabe, University of Tsukuba, Japan
Rafael Kelly, CICESE Research Center, Mexico
Graham Kendall, University of Nottingham Malaysia Campus, Malaysia
Kazuo Kiguchi, Kyushu University, Japan
DaeEun Kim, Yonsei University, Korea, Republic of
Israel Koren, University of Massachusetts, United States
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czech Republic
Masao Kubo, Narional Defense Academy of Japan, Japan
Barbara Kühnlenz, Coburg University of Applied Sciences, Germany
Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
Sébastien Lahaye, Istia - LARIS, France
Jose Lastra, Tampere University of Technology, FAST Laboratory, Finland
Sangyoon Lee, Connecticut College, United States
Dimitri Lefebvre, Greah Université Le Havre, France
Kauko Leiviskä, University of Oulu, Finland
Roland Lenain, Irstea, France
Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
Yangmin Li, The Hong Kong Polytechnic University, Hong Kong
Guoshi Li, University of North Carolina at Chapel Hill, United States
Ke Liao, Kansas University Medical Center, United States
Gordon Lightbody, University College Cork, Ireland
Veronique Limère, Ghent University, Belgium
Guoping Liu, University of South Wales, United Kingdom
Niels Lohse, Loughborough University, United Kingdom
Sérgio Lopes, University of Minho, Portugal
Antonio Lopes, University of Porto, Portugal
Luís Lopes, University of Aveiro, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Ping Lou, Wuhan University of Technology, China
Yu-Shen Lu, National Taiwan Normal University, Taiwan, Republic of China
Martin Lukac, Nazarbayev University, Kazakhstan
Danilo Maccio, National Research Council of Italy, Italy
José Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
Anthony Maciejewski, Colorado State University, United States
Ana Madureira, ISEP/IPP, Portugal
Nitaigour Mahalik, California State University - Fresno, United States
Magdi Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Stamatis Manesis, University of Patras, Greece
Fabio Marchese, Università degli Studi di Milano-Bicocca, Italy
Konrad Markowski, Warsaw University of Technology, Poland
Philippe Martinet, INRIA, France
Tariq Masood, University of Cambridge, United Kingdom
Ross McAree, University of Queensland, Australia
Joaquim Melendez, University of Girona, Spain
Rafael Mendes, University of Campinas, Brazil
Nadhir Messai, CReSTIC, France
Konstantinos Michail, Cyprus University of Technology, Cyprus
Fabio Morbidi, Université de Picardie Jules Verne, France
Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
Vassilis Moulianitis, University of the Aegean, Greece
Angelica Muñoz-Meléndez, INAOE, Mexico
Riccardo Muradore, University of Verona, Italy
Saeid Nahavandi, Deakin University, Australia
Cairo Nascimento, Instituto Tecnológico de Aeronáutica, Brazil
Andreas Nearchou, University of Patras, Greece
Juan J. Nieto, University of Santiago de Compostela, Spain
George Nikolakopoulos, Luleå University of Technology, Sweden
Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
Sanjeevikumar Padmanaban, University of Johannesburg, South Africa
Andrea Paoli, University of Lincoln, United Kingdom
Ju H. Park, Yeungnam University, Korea, Republic of
Gordon Parker, Michigan Technological University, United States
Igor Paromtchik, INRIA, France
Ignacio Parra-Alonso, University of Alcalá, Spain
Pushparaj Pathak, Indian Institute of Technology, India
Dariusz Pazderski, Poznan University of Technology, Poland
Ignacio Peñarrocha, Universitat Jaume I de Castellon, Spain
Qingjin Peng, University of Manitoba, Canada
D. Pham, The University of Birmingham, United Kingdom
S. Ponnambalam, University Malaysia Pahang, Malaysia
Nirvana Popescu, University Politehnica of Bucharest, Romania
Cesar Prada Moraga, Universidad de Valladolid, Spain
Raul Marin Prades, Jaume I University, Spain
Radu-Emil Precup, Politehnica University of Timisoara, Romania
Libor Preucil, Czech Technical University in Prague, Czech Republic
José Ragot, Centre de Recherche en Automatique de Nancy, France
Akshay Rajhans, MathWorks, United States
Oscar Reinoso, Miguel Hernandez University, Spain
Mihailo Ristic, Imperial College London, United Kingdom
Patrick Rives, INRIA - Sophia-Antipolis, France
Juha Röning, University of Oulu, Finland
Mehdi Roopaei, University of Texas at San Antonio, United States
Hubert Roth, University Siegen, Germany
António Ruano, University of Algarve, Portugal
Yassine Ruichek, Université de Technologie Belfort-Montbeliard, France
Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
Mehmet Sahinkaya, Kingston University London, United Kingdom
Priti Sajja, Sardar Patel University, India
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-Badeeh Salem, Ain Shams University, Egypt
Roberto Sanchis Llopis, Universitat Jaume I, Spain
Marcello Sanguineti, University of Genoa, Italy
Nilanjan Sarkar, Vanderbilt University, United States
Jurek Sasiadek, Carleton University, Canada
Hideyuki Sawada, Waseda University, Japan
Daniel Schmidt, SEW EURODRIVE GmbH, Germany
Gerhard Schweitzer, ETH Zurich, Switzerland
João Sequeira, Instituto Superior Técnico, Portugal
Roman Sergienko, Gini GmbH, Germany
Madhavan Shanmugavel, SRM Institute of Science and Technology, India
Jinhua She, Tokyo University of Technology, Japan
Michael Short, Teesside University, United Kingdom
Houria Siguerdidjane, CentraleSupelec, France
Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima, National Institute for Research & Development in Informatics, Romania
Dan Simon, Cleveland State University, United States
Daniel Simon, INRIA, France
Olivier Simonin, CITI. Lab. INSA de Lyon, France
Andrzej Sluzek, Khalifa University, United Arab Emirates
Jorge Solis, Karlstad University / Waseda University, Sweden
Stefan Sosnowski, Technische Universitaet Muenchen (TUM), Germany
Stefano Squartini, Università Politecnica delle Marche, Italy
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
J. Stigter, Wageningen University, Netherlands
Olaf Stursberg, University of Kassel, Germany
Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
Nusret Tan, Inonu University, Turkey
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Simon Thompson, AIST, Japan
Gui Tian, Newcastle University, United Kingdom
Geetam Tomar, Machine Intelligence Research Labs, India
Sven Tomforde, Intelligent Embedded Systems Group, University of Kassel, Germany
Germano Torres, PS Solutions, Brazil
Mohamed Trabia, University of Nevada, Las Vegas, United States
Damien Trentesaux, University of Valenciennes and Hainaut-Cambrésis, France
Wa-Muzemba Tshibangu, Morgan State University, United States
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University, United Kingdom
Ali Turgut, Middle East Technical University, Turkey
Bartlomiej Ufnalski, Warsaw University of Technology, Poland
José Valente de Oliveira, Universidade do Algarve, Portugal
Angel Valera, Universidad Politécnica de Valencia, Spain
Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
César Vargas Rosales, ITESM - Monterrey, Mexico
Germano Veiga, INESC TEC, Portugal
Ramiro Velazquez, Universidad Panamericana, Mexico
Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
Arnoud Visser, Universiteit van Amsterdam, Netherlands
Damir Vrancic, Jožef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universität Hannover, Germany
Mattias Wahde, Chalmers University of Technology, Sweden
Feng Wan, University of Macau, Macau
Zhenzhen Wang, Chinese Academy of Sciences, China
Jinling Wang, University of New South Wales (UNSW) Australia, Australia
Jingyu Wang, Northwestern Polytechnical University (NPU), China
Tongquan Wei, East China Normal University, China
Michael Weyrich, University of Stuttgart, Germany
James Whidborne, Cranfield University, United Kingdom
Warren White, Kansas State University, United States
Min Wu, China University of Geosciences, China
Wenjun Xu, Wuhan University of Technology, China
Farouk Yalaoui, University of Technology of Troyes, France
Qinmin Yang, Zhejiang University, China
Gang Yao, Shanghai Maritime University, China
Weiwei Yu, Northwestern Polytechnical University, China
Hui Yu, University of Portsmouth, United Kingdom
Ludek Zalud, Brno University of Technology, Czech Republic
Marek Zaremba, Université du Québec (UQO), Canada
Massimiliano Zecca, Loughborough University, United Kingdom
Yuming Zhang, Univ. of Kentucky, United States
Jie Zhang, Newcastle University, United Kingdom
Ray Zhong, The University of Auckland, New Zealand
Hanqi Zhuang, Florida Atlantic University, United States
Primo Zingaretti, Università Politecnica delle Marche, Italy
Alois Zoitl, Johannes Keppler University, Austria
Argyrios Zolotas, University of Lincoln, United Kingdom

footer