Home      Log In      Contacts      FAQs      INSTICC Portal
 

Call for Papers

ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

SCOPE

The purpose of the 16th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
2. ROBOTICS AND AUTOMATION
3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
4. INDUSTRIAL INFORMATICS


AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications on Intelligent Control Systems and Optimization
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Learning Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-Based Systems Applications
  • Machine Learning in Control Applications
  • Neural Networks Based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Engineering Applications on Robotics and Automation
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Industrial Networks and Automation
  • Intelligent Transportation Technologies and Systems
  • Mechatronics Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Network Robotics
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Surveillance, Fault Detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


  • Adaptive Signal Processing and Control
  • Biological Inspired Sensors
  • Computer and Microprocessor-Based Control
  • Defect and Change Detection and Identification
  • Engineering Applications
  • Environmental Monitoring and Control
  • Information-Based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-Event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-Frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS


  • Computer-Based Manufacturing Technologies
  • Energy Efficiency and Green Manufacturing
  • Human Factors & Human-System Interface
  • Industrial Automation and Robotics
  • Industrial Internet of Things
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Scheduling and Control
  • Production Tasks' Design, Planning and Management
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Systems Modelling and Simulation

KEYNOTE SPEAKERS

Dimitar FilevResearch & Advanced Engineering, Ford Motor Company, United States
Ali ZolghadriUniversity of Bordeaux - CNRS, France
Evangelos TheodorouGeorgia Institute of Technology, United States

PAPER SUBMISSION

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

PUBLICATIONS

All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (https://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar, Google Scholar and Microsoft Academic.

SECRETARIAT

ICINCO Secretariat
Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
             2900-616 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://www.icinco.org/

VENUE

The conference will be held at the Vienna House Diplomat Prague, Prague, Czech Republic.

The Vienna House Diplomat Prague is located in the diplomatic district, close to the historic centre. Where better to meet and enjoy the good life than where diplomacy prevails? The hotel is one of the most popular conference venues and the views over the rooftops alone make a visit worthwhile. From the wellness area the Castle seem within one's grasp.

CONFERENCE CO-CHAIRS

Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France
Janan ZaytoonUniversity of Reims Champagne Ardennes, France

PROGRAM CHAIR

Oleg GusikhinFord Motor Company, United States

PROGRAM COMMITTEE MEMBERS

Samir Aberkane, Centre de Recherche en Automatique de Nancy (CRAN), France
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Carlos Aldana, University of Guadalajara, Mexico
Mihail Antchev, Technical University - Sofia, Bulgaria
Rui Araujo, University of Coimbra, Portugal
T. Asokan, Indian Institute of Technology Madras, India
M. Amine Atoui, UBS, France
Alfonso Baños, Universidad de Murcia, Spain
Guilherme Barreto, Universidade Federal do Ceará, Brazil
Marcelo Becker, Escola de Engenharia de São Carlos, Brazil
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Carsten Behn, Schmalkalden University of Applied Sciences, Germany
Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
Lyes Benyoucef, Aix-Marseille University, France
Karsten Berns, University of Kaiserslautern, Germany
Reinaldo Bianchi, Centro Universitario da FEI, Brazil
Mauro Birattari, Université Libre de Bruxelles, Belgium
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Glen Bright, University of KwaZulu-Natal, South Africa
Marvin Bugeja, University of Malta, Malta
Kevin Burn, University of Sunderland, United Kingdom
Kenneth Camilleri, University of Malta, Malta
Angelo Cangelosi, University of Plymouth, United Kingdom
Giuseppe Carbone, Università della Calabria, Italy
Alessandro Casavola, University of Calabria, Italy
Riccardo Cassinis, University of Brescia, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Kuo-Ming Chang, National Kaohsiung University of Applied Sciences, Taiwan, Republic of China
Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
Albert Cheng, University of Houston, United States
Sung-Bae Cho, Yonsei University, Korea, Republic of
Ryszard Choras, UTP University of Sciences and Technology, Poland
Paul Christodoulides, Cyprus University of Technology, Cyprus
Chengbin Chu, ESIEE Paris, Université Paris-Est, France
Feng Chu, University of Evry Val d'Essonne, France
Daisuke Chugo, Kwansei Gakuin University, Japan
Carlos Coello, CINVESTAV-IPN, Mexico
James Conrad, University of North Carolina at Charlotte, United States
Erik Cuevas, Universidad de Guadalajara, Mexico
José Cunha, University of Trás-os-montes and Alto Douro, Portugal
Prithviraj Dasgupta, University of Nebraska, United States
Angel Del Pobil, Universitat Jaume I, Spain
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino, Sapienza University of Rome, Italy
Hans Doran, Zurich University of Applied Sciences, Switzerland
António Dourado, University of Coimbra, Portugal
Vasile Dragan, Romanian Academy, Romania
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
Richard J. Duro, Universidade Da Coruña, Spain
Marc Ebner, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Mohammed El-Abd, American University of Kuwait, Kuwait
Simon Fabri, University of Malta, Malta
Mohammed Fadali, UNR, United States
Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
Paolo Fiorini, University of Verona, Italy
Juan Flores, University of Michoacan, Mexico
Mauro Franceschelli, Università di Cagliari, Italy
Georg Frey, Chair of Automation and Energy Systems, Saarland University,, Germany
Toyomi Fujita, Tohoku Institute of Technology, Japan
Mauro Gaggero, National Research Council of Italy, Italy
Iván García Daza, University of Alcalá, Spain
Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
Paulo Gil, Universidade Nova de Lisboa, Portugal
Giuseppina Gini, Politecnico di Milano, Italy
Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
Amr Goneid, The American University in Cairo, Egypt
Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak, Warsaw University of Technology, Poland
Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Maki Habib, The American University in Cairo, Egypt
Kensuke Harada, Osaka University, Japan
Jennifer Harding, Loughborough University, United Kingdom
Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
Noelia Hernández Parra, Universidad de Alcalá, Spain
Yasuhisa Hirata, Tohoku University, Japan
Wladyslaw Homenda, Warsaw University of Technology, Poland
Jonathan How, Massachusetts Institute of Technology, United States
Yisheng Huang, Nat. Ilan Univ., Taiwan, Republic of China
Daniela Iacoviello, Sapienza University of Rome, Italy
Gianluca Ippoliti, Università Politecnica delle Marche, Italy
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Michael Jenkin, York University, Canada
Myong Jeong, Rutgers University, United States
Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Márcio José da Cunha, Federal University of Uberlândia, Brazil
Marc Jungers, CNRS - Université de Lorraine, France
Fabrício Junqueira, University of São Paulo (USP), Brazil
Michail Kalogiannakis, University of Crete, Greece
Tohru Kawabe, University of Tsukuba, Japan
Rafael Kelly, CICESE Research Center, Mexico
DaeEun Kim, Yonsei University, Korea, Republic of
Waree Kongprawechnon, Thammasat University, Thailand
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czech Republic
Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
Nikolay Kuznetsov, Saint-Petersburg State University, Russian Federation
Sébastien Lahaye, Istia - LARIS, France
Jose Lastra, Tampere University of Technology, FAST Laboratory, Finland
Jimmy Lauber, University of Valenciennes, France
Dimitri Lefebvre, Greah Université Le Havre, France
Kauko Leiviskä, University of Oulu, Finland
Roland Lenain, Irstea, France
Fabrizio Leonardi, FEI University, Brazil
Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
Christos Liambas, Aristotle University of Thessaloniki, Greece
Gordon Lightbody, University College Cork, Ireland
Huei-Yung Lin, National Chung Cheng University, Taiwan, Republic of China
Ángel Llamazares, Universidad de Alcalá, Spain
Sérgio Lopes, University of Minho, Portugal
Antonio Lopes, University of Porto, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Ping Lou, Wuhan University of Technology, China
Yu-Shen Lu, National Taiwan Normal University, Taiwan, Republic of China
Eric Lucet, CEA -French Alternative Energies and Atomic Energy Commission, France
Martin Lukac, Nazarbayev University, Kazakhstan
Damian Lyons, Fordham University, United States
Danilo Maccio, National Research Council of Italy, Italy
José Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
Anthony Maciejewski, Colorado State University, United States
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Tariq Masood, University of Cambridge, United Kingdom
Seán McLoone, Queen's Unviersity Belfast, Ireland
Joaquim Melendez, University of Girona, Spain
Nadhir Messai, CReSTIC, France
Konstantinos Michail, Cyprus University of Technology, Cyprus
Agnieszka Miguel, Seattle University, United States
Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
Vassilis Moulianitis, University of the Aegean, Greece
George Moustris, National Technical University of Athens, Greece
Riccardo Muradore, University of Verona, Italy
Cairo Nascimento Jr., Instituto Tecnológico de Aeronáutica, Brazil
Andreas Nearchou, University of Patras, Greece
Juan J. Nieto, University of Santiago de Compostela, Spain
Emmanuel Nuño Ortega, University of Guadalajara, Mexico
Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
Ju H. Park, Yeungnam University, Korea, Republic of
Igor Paromtchik, INRIA, France
Ignacio Parra-Alonso, University of Alcalá, Spain
Pierre Payeur, University of Ottawa, Canada
Dariusz Pazderski, Poznan University of Technology, Poland
Qingjin Peng, University of Manitoba, Canada
Fernando Pereira, University of Porto, Portugal
D. Pham, The University of Birmingham, United Kingdom
Nirvana Popescu, University Politehnica of Bucharest, Romania
Raul Marin Prades, Jaume I University, Spain
Radu-Emil Precup, Politehnica University of Timisoara, Romania
José Ragot, Centre de Recherche en Automatique de Nancy, France
Oscar Reinoso, Miguel Hernandez University, Spain
Mihailo Ristic, Imperial College London, United Kingdom
Juha Röning, University of Oulu, Finland
Hubert Roth, University Siegen, Germany
António Ruano, University of Algarve, Portugal
Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
Priti Sajja, Sardar Patel University, India
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-Badeeh Salem, Ain Shams University, Egypt
Roberto Sanchis Llopis, Universitat Jaume I, Spain
Jurek Sasiadek, Carleton University, Canada
Daniel Schmidt, SEW EURODRIVE GmbH, Germany
Gerhard Schweitzer, ETH Zurich, Switzerland
João Sequeira, Instituto Superior Técnico, Portugal
Roman Sergienko, Gini GmbH, Germany
Madhavan Shanmugavel, SRM Institute of Science and Technology, India
Jinhua She, Tokyo University of Technology, Japan
Michael Short, Teesside University, United Kingdom
Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima, National Institute for Research & Development in Informatics, Romania
Dan Simon, Cleveland State University, United States
Daniel Simon, INRIA, France
Andrzej Sluzek, Khalifa University, United Arab Emirates
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
Olaf Stursberg, University of Kassel, Germany
Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
Tianhao Tang, Shanghai Maritime University, China
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Abdelhamid Tayebi, Lakehead University, Canada
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Gui Tian, Newcastle University, United Kingdom
Germano Torres, PS Solutions, Brazil
Wa-Muzemba Tshibangu, Morgan State University, United States
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University, United Kingdom
Ali Turgut, Middle East Technical University, Turkey
Bartlomiej Ufnalski, Warsaw University of Technology, Poland
Roberto Valenti, MathWorks, United States
Angel Valera, Universidad Politécnica de Valencia, Spain
Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
César Vargas Rosales, ITESM - Monterrey, Mexico
Alexandra Velasco, Universidad Militar Nueva Granada, Colombia
Ramiro Velazquez, Universidad Panamericana, Mexico
Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
Arnoud Visser, Universiteit van Amsterdam, Netherlands
Damir Vrancic, Jožef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universität Hannover, Germany
Mattias Wahde, Chalmers University of Technology, Sweden
Axel Walthelm, Siemens AG, Germany
Feng Wan, University of Macau, Macau
Long Wang, Peking University, China
Jingyu Wang, Northwestern Polytechnical University (NPU), China
James Whidborne, Cranfield University, United Kingdom
Min Wu, China University of Geosciences, China
Farouk Yalaoui, University of Technology of Troyes, France
Qinmin Yang, Zhejiang University, China
Weiwei Yu, Northwestern Polytechnical University, China
Marek Zaremba, Université du Québec (UQO), Canada
Jie Zhang, Newcastle University, United Kingdom
Primo Zingaretti, Università Politecnica delle Marche, Italy
Alois Zoitl, Johannes Keppler University, Austria

(list not yet complete)

footer