Tuesday, April 11, 2006
IEEE Circuits and Systems, Dallas Chapter:   Seminar
https://ewh.ieee.org/soc/cas/dallas/ 
 

 

IEEE Circuits and Systems, Dallas Chapter:   Seminar

 

Title:  Materials and Processes for Flexible Electronics

 

Presenter:  Dr. Bruce Gnade, University of Texas, Dallas, TX

 

Date: Tuesday April 11, 2006. 6:30pm, Refreshments; 7:00pm, Program

 

Location: Dallas Texins Activities Center, Conf Room 1 (North end of  Texas Instruments expressway site, 13900 N Central Expw.; site  entrance on north-bound access road, between Midpark Rd. & Spring Valley Rd.)

 

 

Abstract  :

 

High speed, high performance computation will continue to be dominated by silicon-based microelectronics for the foreseeable future.  However, there are many applications that would benefit from the development of large area, distributed electronic systems, especially if the systems were rugged, flexible, and inexpensive per square foot, even if individual device performance was relatively low.  I will present results on substrates, materials and devices that are compatible with low temperature, flexible substrates, with specific applications for electronic textiles and flexible displays.  Examples of woven organic light emitting structures will be presented.  This work is supported in part by the U.S. Army Soldier and Biological Chemical Command, Soldier Systems Center, DARPA, and Raytheon.

.

 

Biography :

 

Bruce Gnade is a Professor Electrical Engineering and Chemistry, and the Distinguished Chair in Microelectronics at the University of Texas at Dallas.   Bruce received his BA in Chemistry from St. Louis University in 1976 and his Ph.D. in Nuclear Chemistry from the Georgia Institute of Technology in 1982.  He managed several research and technology groups during his 14 years at Texas Instruments including Si Materials and Processing, field emission display advanced technology, and Advanced DRAM Materials.  From 1996-1999 he was on a temporary assignment at the Defense Advanced Research Projects Agency (DARPA) as a program manager, where he managed or co-managed the High Definition Systems Program, the Molecular Electronics Program, and the Heterogeneous Integration of Materials on Silicon Program.  Prior to joining UTD he was at the University of North Texas (9/99 – 08/03) as Chair of the Materials Science Department.  He has authored/co-authored approximately 100 refereed papers, 68 U.S. patents and 54 foreign patents.

 

Sudhind Dhamankar, Publicity Chair, IEEE CAS/Dallas, 214-567-8914