|
 |
|
|
Officers
- 2010 |
|
|
|
|
|
BRUCE
DOYLE - Chair,
IEEE Member |
 |
Bruce Doyle
(M’84) received the B.S.E.E. degree from Carleton University, Ottawa,
Canada in 1984. Since
1984, he has been involved in the design of memories, graphics
processors, analog circuits, mixed-signal IC’s, and high-performance
microprocessors. From 2002 to 2006, he worked for Hewlett-Packard
/ Intel in Fort Collins, CO, on the Itanium family of high-performance
microprocessors as a physical designer in high-speed I/Os, clocking, and
thermal systems. Currently, he is a Principal Member of Technical
Staff at Advanced Micro Devices in Fort
Collins, CO, where he manages circuit development for next-generation HyperTransport physical layers. His expertise includes high-speed
circuit design, analog circuit design, and mixed-signal verification.
He holds 11 US patents. |
|
|
ALVIN LOKE
- Vice Chair / Webmaster,
IEEE Senior Member
|
 |
Alvin Loke
(S'89-M'99-SM'04) received the B.A.Sc. (Eng. Physics) degree with highest honors from the University of British Columbia,
Vancouver, Canada, in 1992, and the M.S.E.E. and Ph.D.E.E. degrees from
Stanford University in 1994 and
1999 respectively. He was recipient of the Canadian NSERC 1967
Graduate Scholarship. While at Stanford, his research focused on copper
interconnects with low-K polymer dielectric. He has interned at Texas
Instruments, Motorola, and at Sumitomo
Electric Industries (Osaka). In 1998, he joined Hewlett-Packard Labs,
Palo Alto, CA where he was involved in embedded ferroelectric memory
technology.
In
1999, when Agilent Technologies divested from Hewlett-Packard, he was
assigned to Chartered Semiconductor Manufacturing, Singapore, to
integrate
copper and local interconnects. |
|
In 2001, he transferred to Fort Collins, CO,
where he designed CMOS phase-locked
loop circuits for low-jitter embedded SerDes I/O and ASIC core clocking.
In 2006, he joined Advanced Micro Devices where he is currently a
Principal Member of Technical Staff designing high-speed links and
interfacing with technology teams on analog/mixed-signal concerns. Dr. Loke has authored over
30 technical
publications and holds 10 US patents. He presently serves on the CICC technical program
committee, SSCS Chapters committee, and is a technical reviewer for IEEE journals. He is
also an active member of the ECE Department Industrial Advisory Board at
Colorado State University. |
|
|
BOB
BARNES - Treasurer,
IEEE Senior Member |
 |
Bob Barnes (S'77-M'81-SM'05) received his B.S.E.E. degree (summa
cum laude) from Washington State University, Pullman, WA, in 1980, and
the M.S.E.E. degree from Stanford University, Stanford, CA, in 1987.
Prior to his undergraduate studies, he served in the United States Air
Force as an Electronics Technician repairing and maintaining
ground-based navigation transmitters. He joined Hewlett-Packard's Disk
Memory Division, Boise, ID, in 1980 where he worked on disk drive
head/servo characterization, and advanced read channel designs. In
1996, he joined Hewlett-Packard's (now Avago Technologies') integrated
circuits design center in Fort Collins, CO where he is currently a
Senior Design Engineer developing 90nm and 65nm CMOS mixed-signal phase-locked
loop architectures and circuits for low-jitter embedded SerDes I/O
applications. He holds eight US patents in areas of disk drive and IC
design, and has authored two papers. |
|
|
STEVE
MARTIN -
Secretary,
IEEE Member |
 |
Steve Martin (S’99-M’05) received a B.S.E.E. with highest honors from the University of
Florida, Gainesville, FL, in 1999 and M.S.E.E. and Ph.D.E.E. from the
University of Michigan, Ann Arbor, MI, in 2002 and 2005, respectively.
He is a recipient of a NSF Graduate Research
Fellowship. His research focused on CMOS-integrated chemical sensors
for trace environmental detection and low-power, low-noise analog and
digital circuits. Dr. Martin has held positions at Accuri Instruments
where he developed a low-noise analog front end for a novel flow
cytometer, at Sonetics Ultrasound where he designed analog integrated
electronics for a CMUT array, and at Intel Corp. where he designed a
6Gb/s line driver in 65nm CMOS. He is currently with Avago
Technologies, Fort Collins, CO, where he is a research scientist
developing acoustic technologies. Dr. Martin has over a dozen technical
publications, has served as a reviewer for several SBIR programs, and
has co-authored a book chapter on CMOS-integrated chemical sensors.
|
|
|
VISVESH SATHE -
Educational Activities,
IEEE Member |
 |
Visvesh Sathe (S'02-M'07) received the B.Tech.
degree in electrical engineering in 2001 from the Indian Institute of
Technology, Bombay, India, and the M.S. and Ph.D. degrees in electrical
engineering and computer science in 2004 and 2007 respectively from the
University of Michigan, Ann Arbor. While at Michigan, his research
focused on low-energy circuit design with particular emphasis on
resonant-clocked digital design. He has held internship positions at
the IBM T.J Watson Research Center and Cyclos Semiconductor, a start-up
focusing on resonant-clocked microprocessors. In 2007, he joined the
power management group at Advanced Micro Devices, Fort Collins, CO, as a
Senior Design Engineer exploring and implementing power reduction techniques
for next-generation processors. Dr. Sathe has authored 11
technical publications and two US patents. |
|
|
Officers for Past Years
|
|
|
|
