[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Abdi, H.
On the Simulation-based Objective Estimation of Road Vehicle Ride Comfort [Program→]
Abdul Rahman, M.
Study on Potential Field Based Motion Planning and Control for Automated Vehicle Collision Avoidance Systems [Program→]
Abe, R.
Sampled-Data Nonlinear Control of a Lotka-Volterra System with Inputs [Program→]
Adade Filho, A.
Dynamic stiffness enhancement of a flight control actuator using control techniques [Program→]
Ahmed, S.
Smart Combination of Sensorless Electromagnetic Levitation and Zero Power Control: A Complimentary Pair Enhancing Mutual Strengths [Program→]
Ahn, K.
A Data-Based Hybrid Driven Control for Networked-based Remote Control Applications [Program→]
Altintas, G.
A Comparison on Genetic Algorithm Based Integer Order and Fractional Order PID Control of Magnetic Bearing System [Program→]
Amakawa, T.
Proposing an adhesion unit for an traveling-wave-type, omnidirectional wall-climbing robot in airplane body inspection applications [Program→]
Anderson, I.
Accurate and Versatile Multivariable Arbitrary Piecewise Model Regression of Nonlinear Fluidic Muscle Behavior [Program→]
Appuhamillage, G.
Optimum Grasp Force and Resistance to Slippage [Program→]
Arsicault, M.
Safe Prismatic Compliant Joint for Human Robot Collaboration [Program→]
Augsburg, K.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Awadallah, M.
An Innovative Control Strategy for a Hybrid Energy Storage System (HESS) [Program→]
Aydin, Y.
Adaptive Variable Structure Control of Active Magnetic Bearings for Rigid Rotors With Uncertain External Payloads [Program→]
Aydin, Y.
A Comparison on Genetic Algorithm Based Integer Order and Fractional Order PID Control of Magnetic Bearing System [Program→]
Ayoubi, Y.
Safe Prismatic Compliant Joint for Human Robot Collaboration [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Bab-Hadiashar, A.
Labeled Multi-Bernoulli Tracking for Industrial Mobile Platform Safety [Program→]
Deep Learning for Texture Classification Via Multi-wavelet Fusion of Scattering Transforms [Program→]
Boudali, A.
Design and Modeling of an Open Platform for Dynamic Walking Research [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Chakirov, R.
Switching Structure Controller for Plastic Injection Moulding System [Program→]
Chattopadhyay, G.
Investigation into Maritime Platform Hull Defects Automation of Sensors and Processing [Program→]
Dynamically Controlling Exterior and Interior Window Coverings through IoT for Environmental Friendly Smart Homes [Program→]
Chiddarwar, S.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Choi, H.
Marine Engine Fault Detection System using Networked Proximity Sensors [Program→]
Choudhury, T.
Industry-led Mechatronics Degree Development in Regional Australia [Program→]
Optimum Grasp Force and Resistance to Slippage [Program→]
Enhancing Solar Power Generation Using Gravity and Fresh Water Pipe [Program→]
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
Chowdhury, A.
Cyber Attacks in Mechatronics Systems Based on Internet of Things [Program→]
Cologni, A.
Anti-sway fixed-order control of bridge cranes with varying rope length [Program→]
Console, A.
Phototropic BristleBot Activity for Robotics and STEM Engagement [Program→]
BattleBots - A First Year Robotics-Based Inter-Discplinary Engineering Project [Program→]
Courrèges, F.
Safe Prismatic Compliant Joint for Human Robot Collaboration [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Dadashnialehi, A.
Deep Learning for Texture Classification Via Multi-wavelet Fusion of Scattering Transforms [Program→]
Dai, F.
Visually Servoed Pickup of Moving Objects with a Dynamically Controlled Manipulator [Program→]
Das Neves Calvo, R.
Dynamic stiffness enhancement of a flight control actuator using control techniques [Program→]
Dhaens, M.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Dinh, T.
A Data-Based Hybrid Driven Control for Networked-based Remote Control Applications [Program→]
Doi, S.
Nondestructive Inspection of Voids in Concrete by Multi-layered Scanning Method with Electromagnetic Waves [Program→]
Du, H.
Hierarchical control for automatic braking of vehicle [Program→]
Advanced vehicle suspension with variable stiffness and damping MR damper [Program→]
Dzitac, P.
Optimum Grasp Force and Resistance to Slippage [Program→]
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Els, S.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Enmei, T.
Slip Ratio Control using Load-side High-resolution Encoder for In-wheel-motor with Reduction Gear [Program→]
Ermidoro, M.
Anti-sway fixed-order control of bridge cranes with varying rope length [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Fang, Y.
Comparison of effect on motor among 2-, 3- and 4-speed transmission in electric vehicle [Program→]
Feng, M.
Nondestructive Inspection of Voids in Concrete by Multi-layered Scanning Method with Electromagnetic Waves [Program→]
Filonenko, A.
A Fuzzy Model-based Integration Framework for Vision-based Intelligent Surveillance Systems [Program→]
Flores, D.
Multispectral Imaging of Crops in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Aerial Photography for 3D Reconstruction in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Formentin, S.
Anti-sway fixed-order control of bridge cranes with varying rope length [Program→]
Fujimoto, H.
Slip Ratio Control using Load-side High-resolution Encoder for In-wheel-motor with Reduction Gear [Program→]
Fukushima, S.
Wearable Finger Exoskeleton using Flexible Actuator for Rehabilitation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Gong, P.
Pneumatic position servo control considering the proportional valve zero point [Program→]
Greenwood, D.
A Data-Based Hybrid Driven Control for Networked-based Remote Control Applications [Program→]
Gunji, D.
Slip Ratio Control using Load-side High-resolution Encoder for In-wheel-motor with Reduction Gear [Program→]
Gurleyen, F.
Adaptive Variable Structure Control of Active Magnetic Bearings for Rigid Rotors With Uncertain External Payloads [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ha, Q.
Frequency Shaped Sliding Mode Control of Magnetorheological Smart Structure Systems [Program→]
Hazaz, M.
{Power-Based Pseudo-Symmetry For 4 Channel Bilateral Control Under Time Delay. [Program→]
Hirota, K.
Walking Assistance System for Walking Stability by using Human Motion Information [Program→]
Hori, N.
Sampled-Data Nonlinear Control of a Lotka-Volterra System with Inputs [Program→]
Hori, Y.
Slip Ratio Control using Load-side High-resolution Encoder for In-wheel-motor with Reduction Gear [Program→]
Hoseinnezhad, R.
Labeled Multi-Bernoulli Tracking for Industrial Mobile Platform Safety [Program→]
Deep Learning for Texture Classification Via Multi-wavelet Fusion of Scattering Transforms [Program→]
Hutterer, M.
Unbalance Compensation of a Magnetically Levitated Rotor for the Whole Operating Range [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ibrahim, M.
Industry-led Mechatronics Degree Development in Regional Australia [Program→]
Optimum Grasp Force and Resistance to Slippage [Program→]
Ibrahim, Y.
On the development of a portable, cost effective and compact master/slave system for robot-assisted Minimally Invasive Surgery [Program→]
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
Ishigami, G.
Energy Efficient Slope Traversability Planning for Mobile Robot in Loose Soil [Program→]
Ivanov, V.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Iwasaki, M.
A Study on Frequency Response Analysis Using Friction Model for Frictional Systems [Program→]
Izumi, K.
Transmission quality of bilateral free space optics system [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Jo, K.
A Fuzzy Model-based Integration Framework for Vision-based Intelligent Surveillance Systems [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Kahandawa, G.
Industry-led Mechatronics Degree Development in Regional Australia [Program→]
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
Kajiwara, H.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
Kamezaki, M.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Kang, T.
Controlled hovering flight of an insect-like tailless flapping-wing micro air vehicle [Program→]
Karmakar, G.
Dynamically Controlling Exterior and Interior Window Coverings through IoT for Environmental Friendly Smart Homes [Program→]
Kashem, S.
Enhancing Solar Power Generation Using Gravity and Fresh Water Pipe [Program→]
Kato, J.
A Study on Frequency Response Analysis Using Friction Model for Frictional Systems [Program→]
Katsura, S.
Model Generation and Parameter Identification of Unknown Environment using Element Description Method [Program→]
Measurement of Endpoint Stiffness in 6 Dimensions [Program→]
FPGA-Based Voltage Control with PDM Inverter for Wideband Drive System Using T-type Neutral-Point-Clamped Topology [Program→]
Precise Force Control for Contact with Flexible Object Considering Environmental Dynamics [Program→]
Kawamura, A.
Design Methodology and Experiment on Battery SOC Balance Circuit of HEECS for EV Power Train [Program→]
Kawataki, S.
Nondestructive Inspection of Voids in Concrete by Multi-layered Scanning Method with Electromagnetic Waves [Program→]
Khomenko, M.
Switching Structure Controller for Plastic Injection Moulding System [Program→]
Kim, D.
Marine Engine Fault Detection System using Networked Proximity Sensors [Program→]
Kim, S.
Marine Engine Fault Detection System using Networked Proximity Sensors [Program→]
Kim, S.
Marine Engine Fault Detection System using Networked Proximity Sensors [Program→]
Kim, S.
Walking Assistance System for Walking Stability by using Human Motion Information [Program→]
Kim, T.
Geomagnetic Localization of Mobile Robot [Program→]
Kobayashi, E.
Evaluation of knotted suture threads from the view point of tension and elongation by using a developed testing machine [Program→]
Kodaira, H.
Design Methodology and Experiment on Battery SOC Balance Circuit of HEECS for EV Power Train [Program→]
Kojima, K.
Design Methodology and Experiment on Battery SOC Balance Circuit of HEECS for EV Power Train [Program→]
Kong, F.
Design and Modeling of an Open Platform for Dynamic Walking Research [Program→]
Konno, M.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Koseki, T.
Smart Combination of Sensorless Electromagnetic Levitation and Zero Power Control: A Complimentary Pair Enhancing Mutual Strengths [Program→]
Kuc, T.
Geomagnetic Localization of Mobile Robot [Program→]
Kurnianggoro, L.
A Fuzzy Model-based Integration Framework for Vision-based Intelligent Surveillance Systems [Program→]
Kurumatani, H.
FPGA-Based Voltage Control with PDM Inverter for Wideband Drive System Using T-type Neutral-Point-Clamped Topology [Program→]
Precise Force Control for Contact with Flexible Object Considering Environmental Dynamics [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Lagoa, C.
A Linear Temporal Logic Based Approach To Vehicle Motion Planning [Program→]
Laribi, A.
On the development of a portable, cost effective and compact master/slave system for robot-assisted Minimally Invasive Surgery [Program→]
Laribi, M.
Safe Prismatic Compliant Joint for Human Robot Collaboration [Program→]
Lemerle, S.
Wearable Finger Exoskeleton using Flexible Actuator for Rehabilitation [Program→]
Li, J.
Pneumatic position servo control considering the proportional valve zero point [Program→]
Li, S.
Adaptive Control of the Translational Oscillator with a Rotational Actuator System [Program→]
Li, W.
Hierarchical control for automatic braking of vehicle [Program→]
Advanced vehicle suspension with variable stiffness and damping MR damper [Program→]
Li, W.
Hierarchical control for automatic braking of vehicle [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Maeda, Y.
A Study on Frequency Response Analysis Using Friction Model for Frictional Systems [Program→]
Man, Z.
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
Manchester, I.
Design and Modeling of an Open Platform for Dynamic Walking Research [Program→]
Manchukanti, S.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Marco, J.
A Data-Based Hybrid Driven Control for Networked-based Remote Control Applications [Program→]
Martinez, J.
Design and Modeling of an Open Platform for Dynamic Walking Research [Program→]
Martinez Santos Ballesteros, H.
Dynamic stiffness enhancement of a flight control actuator using control techniques [Program→]
Maurya, M.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Mazid, A.
Tactile Sensor Based Intelligent Grasping System [Program→]
Industry-led Mechatronics Degree Development in Regional Australia [Program→]
Optimum Grasp Force and Resistance to Slippage [Program→]
Novel Tire Inflating System using Extreme Learning Machine Algorithm for Efficient Tire Identification [Program→]
Mead, R.
Investigation into Maritime Platform Hull Defects Automation of Sensors and Processing [Program→]
Mizoguchi, T.
Time Delay Compensation for DOB-Based Contact Force Control under Time Delay [Program→]
Mohajer, N.
On the Simulation-based Objective Estimation of Road Vehicle Ride Comfort [Program→]
Moheimani, R.
Switched Self-Sensing Actuator for a MEMS Nanopositioner [Program→]
Moore, S.
Switched Self-Sensing Actuator for a MEMS Nanopositioner [Program→]
Murakami, T.
Walking Assistance System for Walking Stability by using Human Motion Information [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Nahavandi, S.
On the Simulation-based Objective Estimation of Road Vehicle Ride Comfort [Program→]
Nakada, S.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
Nakamura, T.
Proposing an adhesion unit for an traveling-wave-type, omnidirectional wall-climbing robot in airplane body inspection applications [Program→]
Nelson, K.
On the Simulation-based Objective Estimation of Road Vehicle Ride Comfort [Program→]
Nguyen-Van, T.
Sampled-Data Nonlinear Control of a Lotka-Volterra System with Inputs [Program→]
Niu, B.
Kinematic Calibration of Industrial Robot by Identification from Relative TCP Deviations during Reorientation Movement [Program→]
Norizuki, H.
Contact Prediction Control for a Tele-operation System with Time Delay [Program→]
Nozaki, T.
Walking Assistance System for Walking Stability by using Human Motion Information [Program→]
Wearable Finger Exoskeleton using Flexible Actuator for Rehabilitation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Oda, K.
Large Force Scaling Bilateral Control Using Voice Coil Motor with Thrust Compensation [Program→]
Evaluation of knotted suture threads from the view point of tension and elongation by using a developed testing machine [Program→]
Ogasawara, S.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
Ogawa, K.
Development of A Haptic Palpation Device With A Scaling Bilateral Control for The NOTES Surgery [Program→]
Ogawa, Y.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
Ohishi, K.
Single Inertialization of a 2-Inertia System Based on Fine Torsional Torque and Sensor-based Resonance Ratio Controllers [Program→]
Ohnishi, K.
Time Delay Compensation for DOB-Based Contact Force Control under Time Delay [Program→]
Development of A Haptic Palpation Device With A Scaling Bilateral Control for The NOTES Surgery [Program→]
Force Capability Evaluation Methods for Bilateral Controlled Manipulators [Program→]
Large Force Scaling Bilateral Control Using Voice Coil Motor with Thrust Compensation [Program→]
Wearable Finger Exoskeleton using Flexible Actuator for Rehabilitation [Program→]
{Power-Based Pseudo-Symmetry For 4 Channel Bilateral Control Under Time Delay. [Program→]
Evaluation of knotted suture threads from the view point of tension and elongation by using a developed testing machine [Program→]
Compliance Control for Stabilization of Bilateral Teleoperation System in the Presence of Time Delay [Program→]
Omata, K.
Slip Ratio Control using Load-side High-resolution Encoder for In-wheel-motor with Reduction Gear [Program→]
Ono, J.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Paigwar, A.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Paredes, J.
Multispectral Imaging of Crops in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Aerial Photography for 3D Reconstruction in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Park, H.
Controlled hovering flight of an insect-like tailless flapping-wing micro air vehicle [Program→]
Park, J.
Geomagnetic Localization of Mobile Robot [Program→]
Phan, H.
Controlled hovering flight of an insect-like tailless flapping-wing micro air vehicle [Program→]
Pomares, J.
A nonlinear H-infinity control approach for closed-chain robotic mechanisms [Program→]
Previdi, F.
Anti-sway fixed-order control of bridge cranes with varying rope length [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Rathnayake, T.
Labeled Multi-Bernoulli Tracking for Industrial Mobile Platform Safety [Program→]
Ren, H.
Pneumatic position servo control considering the proportional valve zero point [Program→]
Rigatos, G.
A nonlinear H-infinity control approach for closed-chain robotic mechanisms [Program→]
A neurofuzzy adaptive H-infinity control method for DC-DC voltage converters [Program→]
Rizal, S.
Marine Engine Fault Detection System using Networked Proximity Sensors [Program→]
Ross, R.
Phototropic BristleBot Activity for Robotics and STEM Engagement [Program→]
BattleBots - A First Year Robotics-Based Inter-Discplinary Engineering Project [Program→]
Roy, S.
Dynamically Controlling Exterior and Interior Window Coverings through IoT for Environmental Friendly Smart Homes [Program→]
Royel, S.
Frequency Shaped Sliding Mode Control of Magnetorheological Smart Structure Systems [Program→]
Ruan, J.
Comparison of effect on motor among 2-, 3- and 4-speed transmission in electric vehicle [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Saafi, H.
On the development of a portable, cost effective and compact master/slave system for robot-assisted Minimally Invasive Surgery [Program→]
Saito, C.
Multispectral Imaging of Crops in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Aerial Photography for 3D Reconstruction in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Saito, Y.
Wearable Finger Exoskeleton using Flexible Actuator for Rehabilitation [Program→]
Sakai, H.
Evaluation of knotted suture threads from the view point of tension and elongation by using a developed testing machine [Program→]
Compliance Control for Stabilization of Bilateral Teleoperation System in the Presence of Time Delay [Program→]
Sakayori, G.
Energy Efficient Slope Traversability Planning for Mobile Robot in Loose Soil [Program→]
Saroya, M.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Savitski, D.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Sayed-Mouchaweh, M.
A neurofuzzy adaptive H-infinity control method for DC-DC voltage converters [Program→]
Schreiber, V.
Collaborative Engineering of Integrated Chassis Control for Ground Vehicle: Case Study of Lifelong Learning Technologies in Automotive Mechatronics [Program→]
Schrödl, M.
Unbalance Compensation of a Magnetically Levitated Rotor for the Whole Operating Range [Program→]
Sekiguchi, H.
Force Capability Evaluation Methods for Bilateral Controlled Manipulators [Program→]
Sheikh, M.
Enhancing Solar Power Generation Using Gravity and Fresh Water Pipe [Program→]
Shi, G.
Modeling and Analysis of a Parallel Continuum Robot Using Artificial Neural Network [Program→]
Shi, Y.
Modeling and Analysis of a Parallel Continuum Robot Using Artificial Neural Network [Program→]
Shimada, Y.
Transmission quality of bilateral free space optics system [Program→]
Shimono, T.
Time Delay Compensation for DOB-Based Contact Force Control under Time Delay [Program→]
Shu, D.
A Linear Temporal Logic Based Approach To Vehicle Motion Planning [Program→]
Siano, P.
A nonlinear H-infinity control approach for closed-chain robotic mechanisms [Program→]
A neurofuzzy adaptive H-infinity control method for DC-DC voltage converters [Program→]
Singh, A.
Design and Implementation of Omni-directional Spherical Modular Snake Robot (OSMOS) [Program→]
Stanger, J.
Phototropic BristleBot Activity for Robotics and STEM Engagement [Program→]
Steinhauser, A.
Iterative learning of time-optimal trajectories for robotic manipulators [Program→]
Sugano, S.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Sugiura, Y.
A Study on Frequency Response Analysis Using Friction Model for Frictional Systems [Program→]
Suito, Y.
Transmission quality of bilateral free space optics system [Program→]
Sun, L.
An Innovative Control Strategy for a Hybrid Energy Storage System (HESS) [Program→]
Sun, S.
Advanced vehicle suspension with variable stiffness and damping MR damper [Program→]
Swevers, J.
Iterative learning of time-optimal trajectories for robotic manipulators [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Takemoto, M.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
Takeuchi, I.
Model Generation and Parameter Identification of Unknown Environment using Element Description Method [Program→]
Tanaka, T.
Nondestructive Inspection of Voids in Concrete by Multi-layered Scanning Method with Electromagnetic Waves [Program→]
Tang, J.
Design and Modeling of an Open Platform for Dynamic Walking Research [Program→]
Tang, X.
Advanced vehicle suspension with variable stiffness and damping MR damper [Program→]
Tani, Y.
Measurement of Endpoint Stiffness in 6 Dimensions [Program→]
Tashiro, T.
Time Delay Compensation for DOB-Based Contact Force Control under Time Delay [Program→]
Tashiro, Y.
Transmission quality of bilateral free space optics system [Program→]
Tennakoon, R.
Labeled Multi-Bernoulli Tracking for Industrial Mobile Platform Safety [Program→]
Tomizuka, D.
Large Force Scaling Bilateral Control Using Voice Coil Motor with Thrust Compensation [Program→]
Compliance Control for Stabilization of Bilateral Teleoperation System in the Presence of Time Delay [Program→]
Toriumi, R.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Trujillano, F.
Multispectral Imaging of Crops in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Aerial Photography for 3D Reconstruction in the Peruvian Highlands through a Fixed-Wing UAV System [Program→]
Tsujimura, T.
Transmission quality of bilateral free space optics system [Program→]
Tsunata, R.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
Tsuruta, Y.
Design Methodology and Experiment on Battery SOC Balance Circuit of HEECS for EV Power Train [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Uchida, S.
Nondestructive Inspection of Voids in Concrete by Multi-layered Scanning Method with Electromagnetic Waves [Program→]
Uchimura, Y.
Contact Prediction Control for a Tele-operation System with Time Delay [Program→]
Ueno, T.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Vagapov, Y.
Switching Structure Controller for Plastic Injection Moulding System [Program→]
Valliappan, P.
Development of a Flame Monitoring and Control System for Oxy-Coal Flames [Program→]
Veale, A.
Accurate and Versatile Multivariable Arbitrary Piecewise Model Regression of Nonlinear Fluidic Muscle Behavior [Program→]
Veligorskyi, O.
Switching Structure Controller for Plastic Injection Moulding System [Program→]
Venter, J.
Tactile Sensor Based Intelligent Grasping System [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Wahid, N.
Study on Potential Field Based Motion Planning and Control for Automated Vehicle Collision Avoidance Systems [Program→]
Wahyono, W.
A Fuzzy Model-based Integration Framework for Vision-based Intelligent Surveillance Systems [Program→]
Walker, P.
An Innovative Control Strategy for a Hybrid Energy Storage System (HESS) [Program→]
Comparison of effect on motor among 2-, 3- and 4-speed transmission in electric vehicle [Program→]
Wang, K.
Visually Servoed Pickup of Moving Objects with a Dynamically Controlled Manipulator [Program→]
Wang, Y.
Adaptive Control of the Translational Oscillator with a Rotational Actuator System [Program→]
Watanabe, A.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
Wilcox, S.
Development of a Flame Monitoring and Control System for Oxy-Coal Flames [Program→]
Wu, G.
Modeling and Analysis of a Parallel Continuum Robot Using Artificial Neural Network [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Xiao, Z.
Dynamically Controlling Exterior and Interior Window Coverings through IoT for Environmental Friendly Smart Homes [Program→]
Xie, S.
Accurate and Versatile Multivariable Arbitrary Piecewise Model Regression of Nonlinear Fluidic Muscle Behavior [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Yamada, K.
Investigation of Enhancing Efficiency and Acceleration in a Flat Shape Axial Gap Motor Having High Torque Characteristic [Program→]
Yamada, Y.
Proposing an adhesion unit for an traveling-wave-type, omnidirectional wall-climbing robot in airplane body inspection applications [Program→]
Yamaguchi, T.
Proposing an adhesion unit for an traveling-wave-type, omnidirectional wall-climbing robot in airplane body inspection applications [Program→]
Yang, S.
Geomagnetic Localization of Mobile Robot [Program→]
Yokokura, Y.
Single Inertialization of a 2-Inertia System Based on Fine Torsional Torque and Sensor-based Resonance Ratio Controllers [Program→]
Yong, Y.
Switched Self-Sensing Actuator for a MEMS Nanopositioner [Program→]
Yoon, J.
A Data-Based Hybrid Driven Control for Networked-based Remote Control Applications [Program→]
Yoshida, K.
Transmission quality of bilateral free space optics system [Program→]
Yoshida, K.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Yoshida, S.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Zamzuri, H.
Study on Potential Field Based Motion Planning and Control for Automated Vehicle Collision Avoidance Systems [Program→]
Zeghloul, S.
Safe Prismatic Compliant Joint for Human Robot Collaboration [Program→]
Zezghloul, S.
On the development of a portable, cost effective and compact master/slave system for robot-assisted Minimally Invasive Surgery [Program→]
Zhang, N.
An Innovative Control Strategy for a Hybrid Energy Storage System (HESS) [Program→]
Comparison of effect on motor among 2-, 3- and 4-speed transmission in electric vehicle [Program→]
Zhao, W.
Preliminary Measurement and Analysis of Microwave Transmission Attenuation in Small Gas Pipeline [Program→]
Zhu, H.
A Study on Torsional Vibration Reduction for Variable-Speed Variable-Pitch Wind Turbines [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]