Full Day

  At the end of 2010, the Science and Technology Advisory Group of the Executive Yuan of Taiwan held the "Intelligent Automation Industry Development Strategy Planning Meeting," which brought together representatives of industry, government, academia, and research to discuss the industrial automation trend required for Taiwan, ROC in response to industrial upgrading and wages rising. The meeting also concluded that ROC government would invest money in conducting R&D plans and strategies to assist domestic industries to develop key intelligent automation technologies for facilitating the industries to be service-oriented and creating new intellectual values for the industries. To this end, the Ministry of Science and Technology (MOST) of ROC is executing the ¡§Advanced Intelligent Automation Technology Development¡¨ policy and sponsoring the following eight indicative integrated research projects of Advanced Intelligent Automation Technology: 1) Advanced Controller for Robot Manipulator, 2) A Full-field and High-precision Automated Optical Inspection and Cloud-based System for the In-line Detection of Surface Profile and Defects, 3) Development of Intelligent Manufacturing System and Inspection Technology For Optical Small Elements, 4) Intelligent Manufacturing Cloud, 5) Reconfigurable Intelligent Precision Robotic Machining Machine, 6) Research and Development of Micro Additive Manufacturing System Using Direct Light Projector, 7) Development of an Intellectualized Symmetric High-Speed Dual-Spindle Grinding Machine and Study on LED Probe Speedy Grinding, and 8) Next-Generation Multi-Function Intelligent Nursing Care System, aimed at leveraging academia¡¦s research capacities to assist domestic industries to cross the thresholds of upgrading and create new-generation industrial values. These projects covers four domains: 1) intelligent manufacturing systems, 2) opto-mechatronics systems & inspection technology, 3) intelligent robots, and 4) intelligent medical & health care systems, which closely relate to the following topics of CASE 2014: Foundations of Automation, Life Science and Health Care, Automation in Micro-scale, Manufacturing Automation, Industrial Informatics, Cloud Computing for Manufacturing Automation, Automation for Machine Tools, and Robotics & Control. The purpose of this workshop is to demonstrate the first-year research results of these eight indicative integrated research projects.

Min-Hsiung Hung, Ph.D., IEEE Senior Member, Professor and Chairman
Department of Computer Science and Information Engineering
Chinese Culture University
Taipei, Taiwan, ROC
E-mail: hmx4@faculty.pccu.edu.tw
Phone: +886-2-28610511 Ext. 33501
Fax: +886-2-28629600

Fan-Tien Cheng, Ph.D., IEEE Fellow, Chair Professor
Institute of Manufacturing Information and Systems
National Cheng Kung University
Tainan, Taiwan, ROC
E-mail: chengft@mail.ncku.edu.tw
Phone: +886-6-2099113
Fax: +886-6-2085334

No.	Time (8/18)	Topic Title	Speakers
Topic 1	08:30-09:20	Advanced Controller for Robot Manipulator	PI: Jwu-Sheng Hu, Professor Department of Electrical Engineering, National Chiao Tung University, Taiwan, ROC
Topic 2	09:20-10:10	A Full-field and High-precision Automated Optical Inspection and Cloud-based System for the In-line Detection of Surface Profile and Defects	PI: Ming Chang, Professor Department of Mechanical Engineering, Chung Yuan Christian University, Taiwan, ROC
Topic 3	10:10-11:00	Development of Intelligent Manufacturing System and Inspection Technology for Optical Small Elements	PI: Jiing-Yih Lai, Professor Department of Mechanical Engineering, National Central University, Taiwan, ROC
Topic 4	11:00-11:50	Intelligent Manufacturing Cloud	PI: Fan-Tien Cheng, Professor Institute of Manufacturing Information and Systems, National Cheng Kung University, Taiwan ROC
	12:00-13:30	Lunch
Topic 5	13:30-14:20	Reconfigurable Intelligent Precision Robotic Machining Machine	PI: Jenq-Shyong Chen, Professor Department of Mechanical Engineering, National Chung Hsing University, Taiwan, ROC
Topic 6	14:20-15:10	Research and Development of Micro Additive Manufacturing System Using Direct Light Projector	PI: Jeng-Ywan Jeng, Professor Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taiwan, ROC
Topic 7	15:10-16:00	Development of an Intellectualized Symmetric High-Speed Dual-Spindle Grinding Machine and Study on LED Probe Speedy Grinding	PI: Shun-Tong Chen, Professor Department of Mechatronic Technology, National Taiwan Normal University, Taiwan, ROC
Topic 8	16:00-16:50	Next-Generation Multi-Function Intelligent Nursing Care System	PI: Li-Chen Fu, Professor Department of Electrical Engineering, National Taiwan University, Taiwan, ROC

Expected participants and their background:
The proposed workshop on "Advanced Intelligent Automation Technologies" aims to demonstrate the results of eight indicative integrated research projects sponsored by MOST of ROC and to provide a forum for researchers, engineers, scientists, managers, and academics to discuss the state of the art in Advanced Intelligent Automation Technologies. The workshop will be an opportunity to share both academic and industrial results and vision for the future of our industries.